1. Products
  2. Dispensing needles and tips
  3. Angled and bent needles

Angled and bent needles

Families
3
Variants
35
Gauge
14G to 30G
Length mm
12.7 to 38.1
Two all-metal 21 gauge dispensing needles with bent tubes and engraved hubs
LS-DSP-104

45-Degree Bent Dispensing Needles

45-degree bent dispensing needles put fluid into hard-to-reach areas where a straight needle would need the syringe or valve tilted. They are used for adhesive beads along inside edges and in recessed joints.

Each needle has a Type 304 stainless steel cannula with a 45 degree bend, fixed in a threaded polypropylene hub. We list 20, 22, 25 and 27 gauge, IDs 0.2 to 0.6 mm, in 1/2, 1 and 1.5 in. lengths. Sizes are cross-referenced to the major brands, and other gauges can be specified to order.

Six dispensing needles with color-coded plastic hubs and stainless steel tubes bent at 45 degrees
45-Degree Bent Dispensing Needles: 15 variants
SKUGaugeLength mmLength inID mmOD mmMaterialHub / fittingOur hub color
LS-DSP-104-30G-0.5IN30G12.71/20.150.3Stainless 304 + PP hubThreaded-
LS-DSP-104-27G-0.5IN27G12.71/20.20.4Stainless 304 + PP hubThreadedClear
LS-DSP-104-27G-1IN27G25.410.20.4Stainless 304 + PP hubThreadedClear
LS-DSP-104-27G-1.5IN27G38.11-1/20.20.4Stainless 304 + PP hubThreadedClear
LS-DSP-104-25G-0.5IN25G12.71/20.250.5Stainless 304 + PP hubThreadedRed
LS-DSP-104-25G-1IN25G25.410.250.5Stainless 304 + PP hubThreadedRed
LS-DSP-104-25G-1.5IN25G38.11-1/20.250.5Stainless 304 + PP hubThreadedRed
LS-DSP-104-23G-0.5IN23G12.71/20.30.6Stainless 304 + PP hubThreaded-
LS-DSP-104-22G-0.5IN22G12.71/20.40.7Stainless 304 + PP hubThreadedBlue
LS-DSP-104-22G-1IN22G25.410.40.7Stainless 304 + PP hubThreadedBlue
LS-DSP-104-22G-1.5IN22G38.11-1/20.40.7Stainless 304 + PP hubThreadedBlue
LS-DSP-104-21G-1.5IN21G38.11-1/20.50.8Stainless 304 + PP hubThreaded-
LS-DSP-104-20G-0.5IN20G12.71/20.60.9Stainless 304 + PP hubThreadedPink
LS-DSP-104-20G-1IN20G25.410.60.9Stainless 304 + PP hubThreadedPink
LS-DSP-104-20G-1.5IN20G38.11-1/20.60.9Stainless 304 + PP hubThreadedPink
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about 45-degree bent dispensing needles

Where along the cannula is the bend?

Bend position varies with overall length. If your fixture needs a set bend point, send us a drawing and we will confirm it.

Can we get a 90 degree bend?

This family is 45 degrees. Ask us about other angles, or see our all-metal bent needles and plastic elbow tips.

Does the bend slow the flow?

A bend adds some resistance compared with a straight cannula of the same gauge and length. If flow drops, step up one gauge.

LS-DSP-108

Bent Elbow Dispensing Tips

Bent elbow dispensing tips are all-plastic tapered tips with a shallow bend near the outlet. They reach behind lips and into angled joints when working with thicker adhesives and sealants, without the scratch risk of a metal cannula.

Each tip is molded in PP or PE with a 35 to 40 degree bend and a threaded base, 29 mm (1.14 in.) overall. We list 14, 18, 20, 22 and 25 gauge, IDs 0.25 to 1.55 mm, color-coded by size. Your label and part numbers can go on the pack.

Six curved plastic dispensing tips in purple, green, orange, pink, gray and blue
Bent Elbow Dispensing Tips: 5 variants
SKUGaugeLength mmLength inID mmMaterialHub / fittingOur hub color
LS-DSP-108-25G25G291.140.25Plastic, PP or PEThreadedRed
LS-DSP-108-22G22G291.140.4Plastic, PP or PEThreadedBlue
LS-DSP-108-20G20G291.140.6Plastic, PP or PEThreadedPink
LS-DSP-108-18G18G291.140.85Plastic, PP or PEThreadedGreen
LS-DSP-108-14G14G291.141.55Plastic, PP or PEThreadedOlive
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about bent elbow dispensing tips

How is this different from a bent steel needle?

This tip is plastic and tapered, so it lowers back pressure on thick materials. Bent stainless needles keep a straight bore and suit thinner fluids and tight spaces.

What is the bend angle?

The bend is 35 to 40 degrees. For 45 degree needles, see our bent stainless options.

Can we use these on a valve?

They fit outlets that take the same threaded base as our straight tapered tips. Confirm your outlet thread before ordering.

LS-DSP-112

Bent Stainless Steel Dispensing Needles

Bent all-metal dispensing needles combine the solvent resistance of a metal hub with a cannula bent to reach into hard-to-reach areas. They suit angled joints and recessed points on assemblies where a plastic hub is not wanted.

Each needle has a bent Type 304 stainless steel cannula in a threaded metal hub. We list 14, 16, 18, 20 and 25 gauge, IDs 0.25 to 1.55 mm, in 1/2, 1 and 1.5 in. lengths. The heavier 14 and 16 gauges handle thicker materials. Sizes are cross-referenced to the major brands for direct quoting.

Two all-metal 15 gauge dispensing needles with bent stainless steel tubes and engraved hubs
Bent Stainless Steel Dispensing Needles: 15 variants
SKUGaugeLength mmLength inID mmOD mmMaterialHub / fitting
LS-DSP-112-25G-0.5IN25G12.71/20.250.5Stainless 304 + metal hubThreaded
LS-DSP-112-25G-1IN25G25.410.250.5Stainless 304 + metal hubThreaded
LS-DSP-112-25G-1.5IN25G38.11-1/20.250.5Stainless 304 + metal hubThreaded
LS-DSP-112-20G-0.5IN20G12.71/20.60.9Stainless 304 + metal hubThreaded
LS-DSP-112-20G-1IN20G25.410.60.9Stainless 304 + metal hubThreaded
LS-DSP-112-20G-1.5IN20G38.11-1/20.60.9Stainless 304 + metal hubThreaded
LS-DSP-112-18G-0.5IN18G12.71/20.861.26Stainless 304 + metal hubThreaded
LS-DSP-112-18G-1IN18G25.410.861.26Stainless 304 + metal hubThreaded
LS-DSP-112-18G-1.5IN18G38.11-1/20.861.26Stainless 304 + metal hubThreaded
LS-DSP-112-16G-0.5IN16G12.71/21.151.6Stainless 304 + metal hubThreaded
LS-DSP-112-16G-1IN16G25.411.151.6Stainless 304 + metal hubThreaded
LS-DSP-112-16G-1.5IN16G38.11-1/21.151.6Stainless 304 + metal hubThreaded
LS-DSP-112-14G-0.5IN14G12.71/21.552.08Stainless 304 + metal hubThreaded
LS-DSP-112-14G-1IN14G25.411.552.08Stainless 304 + metal hubThreaded
LS-DSP-112-14G-1.5IN14G38.11-1/21.552.08Stainless 304 + metal hubThreaded
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about bent stainless steel dispensing needles

What is the bend angle?

Tell us the angle your fixture needs and we will confirm what we can supply in this family.

When is metal better than a plastic hub for a bent needle?

Choose metal for solvents that attack plastic and for heavy use. For general adhesives, our 45 degree plastic-hub needles are an alternative.

Can we get bent needles in longer lengths?

Our listed lengths go to 1.5 in. Longer bent needles can be specified to order.

Carry angled and bent needles? Send us your part numbers.