1. Products
  2. Dispensing needles and tips
  3. Brush tips

Brush tips

Families
1
Variants
6
Length mm
37 to 78
Two flat brush dispensing tips with wide white bristles and aluminum tubes
LS-DSP-114

Brush Tip Dispensing Needles

Brush tip dispensing needles spread glues and greases as they are dispensed. Material flows through the tube into the bristles, so a single pass lays down a film instead of a bead.

Each tip has an aluminum tube with nylon bristles. Round heads come in 2, 4 and 6 mm widths and flat heads in 5 and 10 mm, at about 37 to 40 mm (1.46 to 1.5 in.) overall. A wide 18 mm round brush on a 1.5 mm ID tube is 78 mm (3.07 in.) long. Other brush widths are made to order.

Five round brush dispensing tips with white bristles, aluminum tubes and green bases
Brush Tip Dispensing Needles: 6 variants
SKULength mmLength inMaterial
LS-DSP-114-2MM371.46Nylon brush + aluminum
LS-DSP-114-6MM371.46Nylon brush + aluminum
LS-DSP-114-4MM381-1/2Nylon brush + aluminum
LS-DSP-114-5MM-FLAT381-1/2Nylon brush + aluminum
LS-DSP-114-10MM-FLAT381-1/2Nylon brush + aluminum
LS-DSP-114-18MM783.063Nylon brush + aluminum
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about brush tip dispensing needles

What is a brush tip used for?

It spreads adhesive, grease or coating over an area instead of depositing a bead or dot. The fluid is fed through the tube to the bristles.

Round or flat head?

Round heads come in 2, 4, 6 and 18 mm widths and flat heads in 5 and 10 mm. Pick by the width of the band you need to coat.

What are the bristles made of?

Nylon. Check compatibility with any solvent-based material before use.

Carry brush tips? Send us your part numbers.