1. Products
  2. Dispensing needles and tips
  3. Machine dispensing tips

Machine dispensing tips

Families
5
Variants
34
Gauge
12G to 28G
Length mm
3 to 42
Three stainless steel machine dispensing tips with fine outlets and engraved size numbers
LS-DSP-127

Machine Dispensing Tips with Separate Base

Machine dispensing tips with a separate base are two-piece tips for automated dispensing. A conical outlet tip screws into a separate mounting base on an M3.5 thread, so the outlet size and the machine interface are chosen independently. A thin-walled outlet lets small bores flow freely and helps prevent stringing and blocking.

Outlet tips come with a 0.4 mm or 0.6 mm bore and a 2 mm or 4 mm nozzle extension, 10.7 to 13.7 mm long. Four mounting bases are listed, 14.3 to 15.4 mm long, with threaded or bayonet interfaces, in nickel-plated copper or stainless steel. Longer tips can be made to order.

Three stainless steel machine dispensing tips with threaded bases and engraved size numbers
Machine Dispensing Tips with Separate Base: 8 variants
SKULength mmLength inID mmOD mmMaterialHub / fitting
LS-DSP-127-TIP-0.4-2MM10.70.4210.40.7MetalThreaded
LS-DSP-127-TIP-0.6-2MM110.4380.60.9MetalThreaded
LS-DSP-127-TIP-0.6-4MM120.4720.60.9MetalThreaded
LS-DSP-127-TIP-0.4-4MM13.70.5390.40.7MetalThreaded
LS-DSP-127-BASE-0714.30.563--MetalThreaded
LS-DSP-127-BASE-0515.20.598--MetalThreaded
LS-DSP-127-BASE-0815.20.598--Metal-
LS-DSP-127-BASE-0615.40.606--MetalBayonet
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about machine dispensing tips with separate base

Why use a two-piece tip?

The outlet and base are separate, so you can change outlet size without changing the machine interface.

How do we confirm machine fit?

Send a drawing, a sample or the machine model. Check fit on the machine before a full order.

Which outlet sizes are available?

We list 0.4 mm and 0.6 mm bores with 2 or 4 mm nozzle extensions. Other sizes are made to order.

LS-DSP-128

Bayonet-Mount Machine Dispensing Tips

Bayonet-mount machine dispensing tips are one-piece stainless steel tips that lock into a Luer-interface valve body with a push-and-twist bayonet mount. One-piece construction leaves no joint between outlet and mount, and the conical shape and thin-walled outlet give stable micro-dispensing.

Eight bores are listed, from 0.15 mm (0.45 mm OD) to 0.6 mm (0.9 mm OD), all 18.3 mm overall. They are used in SMT, LED and semiconductor assembly with adhesives, solder paste, conductive and UV glues.

Three one-piece stainless steel bayonet-mount machine dispensing tips with conical outlets and engraved size numbers
Bayonet-Mount Machine Dispensing Tips: 8 variants
SKULength mmLength inID mmOD mmMaterialHub / fitting
LS-DSP-128-0.218.30.720.20.5MetalBayonet
LS-DSP-128-0.318.30.720.30.6MetalBayonet
LS-DSP-128-0.418.30.720.40.7MetalBayonet
LS-DSP-128-0.518.30.720.50.8MetalBayonet
LS-DSP-128-0.618.30.720.60.9MetalBayonet
LS-DSP-128-0.1518.30.720.150.45MetalBayonet
LS-DSP-128-0.2518.30.720.250.55MetalBayonet
LS-DSP-128-0.4518.30.720.450.75MetalBayonet
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about bayonet-mount machine dispensing tips

How does a bayonet mount work?

The tip is pushed into the mount and turned part of a turn to lock. It releases the same way, without unscrewing.

Will these fit our machine?

They are made for Luer-interface valve bodies. Send the valve model or a sample if you are unsure.

Is there a threaded version?

Yes, see our threaded-mount machine dispensing tips.

LS-DSP-129

Threaded-Mount Machine Dispensing Tips

Threaded-mount machine dispensing tips are one-piece stainless steel tips that screw into a Luer-interface valve body. They suit automated lines where the tip must sit at a repeatable height after each change, and the conical shape with a thin-walled outlet gives stable micro-dispensing.

Six bores are listed, from 0.2 mm (0.5 mm OD) to 0.5 mm (0.8 mm OD), all 18.3 mm overall.

Four one-piece stainless steel threaded-mount machine dispensing tips with conical outlets and engraved size numbers
Threaded-Mount Machine Dispensing Tips: 6 variants
SKULength mmLength inID mmOD mmMaterialHub / fitting
LS-DSP-129-0.218.30.720.20.5MetalThreaded
LS-DSP-129-0.318.30.720.30.6MetalThreaded
LS-DSP-129-0.418.30.720.40.7MetalThreaded
LS-DSP-129-0.518.30.720.50.8MetalThreaded
LS-DSP-129-0.2518.30.720.250.55MetalThreaded
LS-DSP-129-0.4518.30.720.450.75MetalThreaded
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about threaded-mount machine dispensing tips

What do we need to specify?

The bore you need and your valve model. A sample of your current tip covers both.

Why one-piece?

With the outlet and mount in one part, there is no joint between them to loosen.

Is there a bayonet version?

Yes, see our bayonet-mount machine dispensing tips.

LS-DSP-130

Two-Piece Machine Dispensing Tips, Valve-Specific Base

Split-type machine dispensing tips are compact stainless steel tips for multi-head, high-speed dispensing machines. The tip seats in the head on a 2 mm interface.

Seven outlet sizes are listed, from 0.3 mm to 0.8 mm, all 13 mm overall with a 3 mm body. Tips can be supplied with a coating on request.

Four stainless steel split-type machine dispensing tips with long tapered outlets and a collar
Two-Piece Machine Dispensing Tips, Valve-Specific Base: 7 variants
SKULength mmLength inID mmMaterial
LS-DSP-130-0.3130.5120.3Metal
LS-DSP-130-0.4130.5120.4Metal
LS-DSP-130-0.5130.5120.5Metal
LS-DSP-130-0.6130.5120.6Metal
LS-DSP-130-0.7130.5120.7Metal
LS-DSP-130-0.8130.5120.8Metal
LS-DSP-130-0.35130.5120.35Metal
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about two-piece machine dispensing tips, valve-specific base

Are these approved by the equipment maker?

No. They are made to fit the head dimensions, not as an OEM-approved part. Confirm fit on your machine.

What do we need to send?

The outlet size you need and the machine model, or a sample tip.

Can the tips be coated?

Yes. Tell us your coating requirement when ordering.

LS-DSP-131

Metal-Base Machine Dispensing Needles, Valve-Specific

These metal-base machine dispensing needles are made for dispensing valve heads that take a short needle on a metal base. The base is slightly longer than a standard needle base.

Five sizes are listed: 21, 22 and 25 gauge with a 3 mm exposed tube, 28 gauge with 6.5 mm, and 12 gauge with a 42 mm exposed tube. Tube thickness and length can be specified to order. They are dimensioned to the head, not approved by the equipment maker, so confirm fit before a full order.

Metal-Base Machine Dispensing Needles, Valve-Specific: 5 variants
SKUGaugeLength mmLength inID mmOD mmMaterial
LS-DSP-131-28G28G6.51/40.170.32Metal
LS-DSP-131-25G25G31/80.250.5Metal
LS-DSP-131-22G22G31/80.40.7Metal
LS-DSP-131-21G21G31/80.50.8Metal
LS-DSP-131-12G12G421.6542.32.8Metal
Get a quote for this family

Other gauges, lengths and hub colors can be specified to order. Request samples

Questions about metal-base machine dispensing needles, valve-specific

What do we need to specify?

Needle gauge and exposed tube length, plus your valve model. A sample from your current stock is the quickest route.

Why such short tubes?

Short exposed tubes keep the outlet close to the valve for fine dots. Longer tubes can be specified to order.

Are these OEM parts?

No. They are made to match the head's dimensions. Test fit on the machine before switching.

Carry machine dispensing tips? Send us your part numbers.